Part of a UV30 vacuum pump from 2002 has returned to Pneumofore for its first overhauling after 20 years of continuous operation. Only the air-end was sent for revision. The machine has been running at Glassforce in Nigeria to support the moulding process of container glass. The vacuum cools the mould and reduces defects, as it evacuates all the air to enable fast and complete loading of the mould with hot, liquid glass.
The overhauling in this case was limited to only the replacement of the bearings as the vanes are still in great condition. A second UV30 vacuum pump continues to run at Glassforce without ever having required overhauling, notwithstanding its 160,000 hours of operation thus far.
15.06.2022, Pneumofore
News material on the Site is copyright and belongs to the Company or to its third party news provider, and all rights are reserved. Any User who accesses such material may do so only for its own personal use, and the use of such material is at the sole risk of the User. Redistribution or other commercial exploitation of such news material is expressly prohibited. Where such news material is provided by a third party, each User agrees to observe and be bound by the specific terms of use applying to such news material. We do not represent or endorse the accuracy or reliability of any of the info contained in any news or external websites referred to in the news.
Should the content or the design of these sites violate third parties rights or legal prescriptions, we kindly ask you to send us a respective message without invoice or cost. We guarantee that passages where the claim is considered as justified will be removed immediately, without any necessity to involve any lawyer into this issue. We will reject any claim caused by submission of a honorary note in this regard without any prior contact and confirmation of the issueby us and we reserve the right ssue counter claim ourselves because of violation of aforesaid conditions.